Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
12. Bend collar nut (1) so it touches the wall of the slot in the pinion shaft.
13. Connect propeller shaft to pinion flange.
NOTE: On dual rear wheel axle install axle shafts.
14. Pour in oil up to bottom edge of oil filler hole (1).
15. Screw in oil filler plug (1) and tighten to 100 Nm (74 ft. lbs.).
16. Install wheels at rear axle.
17. Operate brake pedal several times until brake pads contact brake discs (brake pressure built up).
18. Attach rear brake cables if removed and adjust parking brake.
