Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Windshield Washer Hose: Description and Operation
Operation
Front
FRONT
Washer fluid in the washer reservoir is pressurized and fed by the front washer pump/motor unit through the front washer system plumbing and fittings to
the two front washer nozzles. Whenever routing the washer hose or a wire harness containing a washer hose, it must be routed away from hot, sharp, or
moving parts; and, sharp bends that might pinch the hose must be avoided.
Rear
REAR
Washer fluid in the washer reservoir is pressurized and fed by the rear washer pump/motor unit through the rear washer system plumbing and fittings to
the rear washer nozzles located on the rear wiper arms on the outside of the rear door glass. Whenever routing the washer hose or a wire harness
containing a washer hose, it must be routed away from hot, sharp, or moving parts; and, any sharp bends that might pinch the hose must be avoided.
Headlamp
HEADLAMP
Washer fluid in the washer reservoir is pressurized and fed by the headlamp washer pump/motor unit through the headlamp washer system plumbing and
fittings to the two telescopic headlamp washer nozzles. Whenever routing the washer hose, it must be routed away from hot, sharp, or moving parts; and,
sharp bends that might pinch the hose must be avoided.