Sprinter 3500 L5-2.7L DSL Turbo (2004)
Fig. 21
9. Unlock retainer clip and disconnect control cable. (Fig. 21)
10. Remove trim panel.
INSTALLATION
1. Position trim panel and connect control cable.
2. Install trim panel.
3. Position window frame molding and seat clips fully.
4. Close pocket door.
5. Install window crank and mounting ring, if equipped.
6. Install handle screws.
7. Connect electrical connectors and install switch bezel.
8. Install handle cover.
9. Connect battery negative cable.
Body Repair Manual
Removing And Installing Door Liner On Hinged Door
Removing and installing door liner on hinged door
Removing, installing
1. Release door handle cover from retaining catch
2. Remove door handle cover upward
3. Remove window crank cover
4. Unlock window crank in direction of arrow and remove
5. Unscrew screws from hinged door liner
6. Pull door liner upward slightly and fold down
7. Remove inner door actuation from door liner