Sprinter 3500 L5-2.7L DSL Turbo (2004)
Lower Sliding Door Roller: Removal and Replacement
LOWER ROLLER ARM
REMOVAL
Fig. 5
1. Remove trim plugs and screws and remove stepwell scuff pad. (Fig. 5)
Fig. 6
2. Remove the door screws and remove the roller arm. (Fig. 6)
INSTALLATION
1. Install roller arm and install door screws.
2. Tighten screws to 25 N.m (18 ft.lbs.).
3. Install stepwell scuff pad and install screws.
4. Adjust door if necessary.