Sprinter 3500 L5-2.7L DSL Turbo (2004)
Sliding Door Handle: Service and Repair
Body Repair Manual
Sliding Door Handle Strip
Remove/install Sliding Door Handle Strip
Remove/install sliding door handle strip
Remove
1. Punch through drift of expansion rivet on handle strip (1) and pry out expansion rivet.
2. Separate edge sealing all way round between the handle strip and the insulation element and then remove the handle strip.
3. Remove residue adhesive on handle strip and on insulation element
Install
4. Apply handle strip to insulation element and press in expansion rivet.
5. Apply sealing compound to gap between handle strip and insulation element all round
Sliding Door Outer Handle
Removing and installing outer door handle for sliding door