Sprinter 3500 L5-2.7L DSL Turbo (2004)
Trunk / Liftgate Latch: Service and Repair
Rear Latch
REMOVAL
Rear Latch
1. Disconned and isolate battery negative cable.
2. Remove trim panel.
3. Remove the screws and remove the latch from door.
4. Disconned electrical connector, if equipped.
5. Disconned control cable.
INSTALLATION
1. Conned control cable.
2. Conned electrical connector, if equipped.
3. Position latch in door and install screws.
4. Tighten screws to 10 Nm (89 in. lbs.).
5. Install trim panel.
6. Conned battery negative cable.