Sprinter 3500 L5-2.7L DSL Turbo (2004)
Front Fender: Service and Repair
Front End Paneling/Except Models 901.6,902.6,903.6,904.6
Removing And Installing Front End Paneling
Removing and installing front end paneling
Removal, installation
1
Remove front bumper
2
Remove turn signal lamps and front end center element (a) with head lamps
3
Unscrew bolts (7) on A-pillar
4
Remove sealant (18) between wheelhouse and fender
5
Unscrew bolts (19, 20, 21 and 22)
6
Drill out spreading pins (24) and pull off bumper mount (23)
7
Pull connector off of auxiliary turn signal lamp
8
Remove fender
Remove sealant residues.
9
Reinstall in opposite order
Before installing spray fender on inside with underbody protection agent.
Seal inside of fender at wheel well and wheel well transition
MODELS 901.6, 902.6, 903.6, 904.6