Sprinter 3500 L5-2.7L DSL Turbo (2004)
Fig. 6
3. Using a trim stick C-4755 or equivalent, release the trim clips and remove the trim. (Fig. 6)
INSTALLATION
1. Route the seat belt through the trim and mount the trim panel.
2. Seat the mounting clips fully.
3. Position the door opening weatherstrip back along the mounting flange.
4. Install the seat belt and mounting bolt.
5. Tighten the bolt to 35 N.m (26 ft.lbs.).
D-Pillar Trim
D - PILLAR TRIM
REMOVAL
1. Remove the three plastic twist screws and remove the panel.
INSTALLATION
1. Install the panel and install the three twist screws.