Sprinter 3500 L5-2.7L DSL Turbo (2004)
6. Install the wiring harness duct (Fig. 55).
7. Connect the oil level sensor (Fig. 55).
8. Lower the vehicle.
9. Lower the engine until the engine mount and engine supports make contact.
10. Start and hand tighten the engine mount bolts.
11. Lower the engine the rest of the way and remove the engine support fixture.
12. Tighten the engine mount bolts to 83 Nm (61 ft. lbs.).
13. Install the sway bar and tighten bolts to 30 Nm (22 ft. lbs.).
14. Refill crankcase with the proper engine oil to the proper level. See: Engine Oil/Specifications
15. Reconnect negative battery cable.
WARNING: USE EXTREME CAUTION WHEN THE ENGINE IS OPERATING. DO NOT PUT YOUR HANDS NEAR THE PULLEYS,
BELTS OR FAN. DO NOT WEAR LOOSE CLOTHES.
16. Start the engine and inspect for leaks.
