Sprinter 3500 L5-2.7L DSL Turbo (2004)
9. If a new clutch plate and/or clutch pulley are being installed, the air gap between the clutch plate and clutch pulley must be checked.
10. Install the retainer that secures the compressor clutch coil lead to the top of the compressor.
11. Reconnect the engine wire harness connector to the clutch coil lead on the top of the compressor.
12. Reinstall the serpentine accessory drive belt.
13. Reconnect the battery negative cable.
14. If a new clutch plate and/or clutch pulley are being installed, the new clutch components must be burnished.
