Sprinter 3500 L5-2.7L DSL Turbo (2004)
Headlamp Bulb: Service and Repair
Low Beam Headlamp Bulb
REMOVAL
1. Disconnect and isolate the battery negative cable.
Front Lamp Unit Bulbs Remove/Install
2. Disengage and swing the retainers that secure the front lamp unit rear cover to each side of the lamp housing and remove the cover.
Low Beam Headlamp Bulb Remove/Install
3. Disconnect the front lamp unit wire harness connector from the low beam headlamp bulb base.
4. Disengage the low beam headlamp bulb retainer by pushing it slightly toward the front lamp unit housing and downward from the bulb base, then
pivot the retainer off of the bulb base.
5. Remove the low beam headlamp bulb from the integral bulb holder on the front lamp unit reflector.
INSTALLATION
1. Position the low beam headlamp bulb into the integral bulb holder on the front lamp unit reflector.
1. Be certain that the lugs on the bulb base are engaged in the recesses of the bulb holder.
2. Engage the low beam headlamp bulb retainer by pivoting it over the bulb base, pressing it slightly toward the front lamp unit housing and upward
