Sprinter 3500 L5-2.7L DSL Turbo (2004)
7. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it on the discharge line fitting.
8. Connect the discharge line fitting to the condenser inlet port.
9. Install the nut that secures the discharge line fitting to the condenser. Tighten the nut to 33 N.m (24 ft. lbs.).
10. Install the front fascia.
11. Install the grille.
12. Evacuate the refrigerant system.
13. Charge the refrigerant system.
14. Reconnect the negative battery cable.