Sprinter 3500 L5-2.7L DSL Turbo (2004)
Oil Change Reminder Lamp: Service and Repair
ASSYST MAINTENANCE COMPUTER - RESET
The counter can also be reset by any individual after the indicated service has been performed. To do so:
1. Turn key to the ON/RUN position.
2. Within one second press the knob/button (mi/km) twice.
3. The present status for days or distance is displayed. Within 10 seconds turn the key to OFF/LOCK.
4. Press and hold the knob/button (mi/km), while turning the key to ON/RUN again. The present status for days or distance is displayed once more.
Continue to hold the knob/button (mi/km).
5. After approximately 10 seconds, a signal sounds and the display shows 7,000 miles for approximately 10 seconds.
6. Release the knob/button (mi/km).
If the counter was inadvertently reset, have an authorized dealer correct it.
The message is displayed for approximately 10 seconds when turning the key to the ON/RUN position, or while driving when reaching the service
warning threshold. It can be canceled manually by pressing the knob/button (mi/km).
Once the suggested term has passed, the message plus either the symbol for Service A or the symbol for Service B preceded by a - (minus symbol)
blinks for approximately 30 seconds and a signal sounds every time when turning the key to the ON/RUN position.
The display can also be called up for approximately 10 seconds with the display illuminated by pressing the knob/buffon (mi/km) twice within one
second.
Following a completed A or B service your authorized dealer sets the counter to 7,000 miles
