Sprinter 3500 L5-2.7L DSL Turbo (2004)
Intake Air Temperature (IAT) Sensor: Service and Repair
Boost Pressure And Inlet Air Temperature Sensors
REMOVAL
1. Disconnect the negative battery cable.
2. Unplug the wiring harness connector at the intake air temperature sensor.
3. Press together the sensor locking arms and remove the sensor from the charge air pipe.
INSTALLATION
1. Position the intake air temperature sensor above the charge air pipe access hole.
2. Press together the sensor locking tabs, seat the sensor to the pipe and release tabs.
3. Connect negative battery cable.
