dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/T/Driveline - Ringing Sound Upon Gear Engagement|Page 2888 > < A/T/Driveline - Ringing Sound Upon Gear Engagement|Page 2882
Page 1
background image

Output Shaft: All Technical Service Bulletins
A/T/Driveline - Ringing Sound Upon Gear Engagement

NUMBER: 03-002-04

GROUP: Axles/Suspension

DATE: May 4, 2004

SUBJECT:
Ringing Sound Comming From Propeller Shaft When Transmission Is Shifted From Drive To Reverse Or Reverse To Drive

OVERVIEW:

This bulletin involves applying "Stud N Bearing Mount Adhesive" to the transmission output shaft splines.

MODELS:
2003 - 2004

VA

Sprinter

SYMPTOM/CONDITION:

A ringing, snapping or popping sound may be heard coming from the drive line when the transmission is shifted from forward to reverse or reverse to
forward. The sound may also occur when the brakes are released after shifting into or out of Drive or Reverse.

DIAGNOSIS:

Start the vehicle, apply the park brake and shift the transmission from forward to reverse and back with the brakes applied. If the sound is present,
perform the Repair Procedure.

PARTS REQUIRED

SPECIAL TOOLS/EQUIPMENT REQUIRED

REPAIR PROCEDURE:

1.

Raise the vehicle on a hoist.

2.

Mark the propeller shaft in relation to the transmission and axle flanges and remove the propeller shaft.

A/T/Driveline - Ringing Sound Upon Gear Engagement|Page 2888 > < A/T/Driveline - Ringing Sound Upon Gear Engagement|Page 2882