Sprinter 3500 V6-3.0L DSL Turbo (2008)
1. Remove the bumper, Removal.
2. Press step platform on bumper downward at the front and unhook at the rear.
3. Unclip front covering (2) from bumper.
4. Unclip air grille (1) from the bumper.
5. Unclip the central connector (14) from the bumper and detach the Parktronic wiring harness (7) from the bumper.
6. Release the retaining lugs on the front Parktronic sensors (10, 9, 8, 6, 5, 4) and remove the sensors.
7. Remove the screws (11) and remove the fog lamps (12, 13).
Installation
INSTALLATION
Assembly
1. Install the fog lamps (12, 13) and install the screws (11).
2. Install the Parktronic sensors (10, 9, 8, 6, 5, 4) and seat the retaining lugs fully.
3. Attach the Parktronic wiring harness (7) to the bumper and seat the central connector clip fully (14).
4. Install the air grille (1) and seat fully.
5. Install the lower grille covering (2) and seat the clips fully.
6. Install the step platform and hook to bumper at the rear.
7. Seat the front of the step platform fully.