Sprinter 3500 V6-3.0L DSL Turbo (2008)
Front Door Latch: Service and Repair
Service Manual
Front Door Latch - Removal
REMOVAL
1. Remove the water shield (2), .
2. Carefully pry release lever (3) off of the lock cylinder (1).
3. Remove the bolts (7) and remove the latch (6).
4. Disconnect the electrical connector (5).
5. Unhook the cable.
Front Door Latch - Installation
INSTALLATION
1. Hook up the cable.
2. Connect the electrical connector (5) and install the latch (6) into the door.
3. Install the bolts (7) and tighten to 10 Nm (89 in. lbs.).
4. Connect the lock cylinder release lever (2) to the lock cylinder (1).
5. Install the water shield (2), .