Sprinter 3500 V6-3.0L DSL Turbo (2008)
Removing, installing
1. Release cover for door pull handle on retaining lug with offset screwdriver
2. Remove door handle cover upward
3. Remove window crank cover
4. Unlock window crank in direction of arrow and remove
5. Unlock bottom door pocket and lift out of hinge in direction of arrow
6. Unscrew hinge supports
7. Loosen door handle
8. Push door handle forward slightly and lift off
9. Close rotary tumbler on door lock
10. Detach door lock 11. Unscrew screws from paneling
12. Slightly pull paneling upward and remove together with lock
13. Install in the reverse order Screw for paneling on hinged door Nm 10