Sprinter 3500 V6-3.0L DSL Turbo (2008)
1. Remove the trim plugs covering the bolts.
2. Remove bolts (4) from handle (3).
CAUTION: Guide cables carefully when disconnecting or removing to prevent damage to the cables.
3. Position the handle (3) away from the door (1) and disconnect the cables (4).
Installation
INSTALLATION
CAUTION: Guide cables carefully when connecting or installing to prevent damage to the cables.
1. Position the handle (3) close to the door (1) and connect the cables (4), then install the handle (3) to the door (1)
2. Install bolts (4) to the handle (3) and tighten bolts to 8 Nm (71 in. lbs.).
3. Install the trim plugs covering the bolts.
