Sprinter 3500 V6-3.0L DSL Turbo (2008)
Installation.
3. Install the wheel flange ring (5). Tighten to 200 Nm (148 ft. lbs.).
4. Install the brake caliper (1) See: Brake Caliper/Service and Repair/Disc Brake Caliper - Installation.
5. Install the brake pads (2)See: Brake Pad/Service and Repair/Brake Pads - Installation.
6. Adjust the parking brake See: Parking Brake System/Parking Brake Shoe/Adjustments
7. Press and release the brake pedal several times until pressure has built up.
8. Check fluid in reservoir and correct if necessary.
9. Install the rear wheels.
10. Lower the vehicle.
