Sprinter 3500 V6-3.0L DSL Turbo (2008)
Brake Bleeding: Service and Repair
Base Brakes - Pressure Bleeding
PRESSURE BLEEDING
Use approved brake fluid See: Maintenance See: Heating and Air Conditioning/Refrigerant/Description and Operation/A/C Refrigerant See:
Maintenance/Fluids/Fluid - A/T/Description and Operation/Description - Automatic Transmission Fluid - NAG1 See: Maintenance/Fluids/Fluid -
Differential/Description and Operation See: Brake Fluid/Description and Operation See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel/Description and Operation See: Engine, Cooling and Exhaust/Cooling System/Coolant/Description and Operation/HOAT Coolant See:
Maintenance/Fluids/Power Steering Fluid/Description and Operation See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Engine
Oil/Description and Operation. Use fresh, clean fluid from a sealed container at all times.
Follow the manufacturers instructions carefully when using pressure equipment. Do not exceed the tank manufacturers pressure recommendations.
Generally, a tank pressure of 15-20 psi is sufficient for bleeding.
Fill the bleeder tank with recommended fluid and purge air from the tank lines before bleeding.
Do not pressure bleed without a proper master cylinder adapter. The wrong adapter can lead to leakage, or drawing air back into the system.
