Parking Brake Cable Removal - Sprinter 3500 V6-30L DSL Turbo (2008)
Parking Brake Cable: Service and Repair
Parking Brake Cable - Installation
Front Cable
FRONT CABLE
1. Install the front park brake cable to the vehicle.
2. Install the front park brake cable (3) to the hand brake lever (2).
3. Install the trim (1) for the park brake lever.
4. Install the rubber grommet (3).
5. Clip the cable guides at the frame cross member (2).
6. Reconnect the front park brake cable (1) to the pulley unit.
7. Adjust the parking park See: Adjustments.
8. Lower the vehicle.
Rear Cable - Single Rear Wheel (SRW)
REAR CABLE - SINGLE REAR WHEEL (SRW)
NOTE: Route the park brake cable free of tension and the risk of chafing.
1. Install the park brake cable.
2. Install all tie straps for the brake cable.