Sprinter 3500 V6-3.0L DSL Turbo (2008)
11. Connect the injector electrical connectors and return fuel hoses.
12. Install the high pressure fuel line from the high pressure pump to the fuel rail.
13. Install the fuel supply pipe bundle, reclamp at the high pressure pump and fuel filter.
14. Connect the fuel tank supply and return hoses (1) at fuel pipe bundle.
15. Install the engine cover (3) and bracket.
16. Connect the negative battery cable.
17. Start engine, allow to warm, turn engine off and inspect for leaks.
18. Install the strut tower support (2).
Right
RIGHT
1. Clean all mating surfaces.