Sprinter 3500 V6-3.0L DSL Turbo (2008)
Timing Cover: Service and Repair
Timing Cover - Removal
REMOVAL
1. Disconnect negative battery cable.See: Starting and Charging/Battery/Battery Cable/Service and Repair/Battery Cables - Removal
2. Remove the engine cover.
3. Remove the front engine cover bracket.
4. Raise and support the vehicle.
5. Drain the power steering into a suitable and appropriately marked container.
6. Remove the power steering hose between the pump and cooling fan.
7. Remove the power steering hose between the cooling fan and suspension.
8. Remove the lower cooling fan module retaining bolts.
9. Disconnect the cooling fan wiring harness connector.
10. Remove the power steering line between the retainer and cooling fan module.
11. Remove the front splash shield.
12. Remove the front oil pan to timing cover bolts.
13. Lower the vehicle.
14. Remove the hoses at the power steering reservoir.
15. Remove the cooling fan module upper bolts and remove the fan assembly.
16. Remove the charge air outlet tube.
