Sprinter 3500 V6-3.0L DSL Turbo (2008)
15. Remove special tool 9102 crankshaft lock.
16. Install the starter blank.
17. Install the lower cooling fan module bolts. Tighten lower bolts to 14 Nm (10 ft. lbs.).
18. Install the power steering line between the retainer and cooling fan module.
19. Connect the cooling fan wiring harness connector.
20. Install the power steering hose between the cooling fan and suspension.
21. Install the power steering hose between the pump and cooling fan.
22. Install the front skid plate.
23. Lower the vehicle.
24. Install the hoses at the power steering reservoir.
25. Fill the power steering reservoir.
26. Install the front engine cover bracket.
27. Install the engine cover.
28. Connect the negative battery cable.
29. Purge the air from the power steering system before starting by raising the vehicle and rotating the steering wheel back and forth 20 times.
30. Start the engine and follow the bleed procedure with the scan tool.
31. Turn engine off and inspect for leaks.
