Sprinter 3500 V6-3.0L DSL Turbo (2008)
The front MTC A/C-heater control (1) is located in the instrument panel and contains:
-
a rotary control to select comfort temperatures (2).
-
a thumb wheel control for manually increasing/decreasing fan speed and turning the system completely off (3).
-
a push button air recirculation control (4). An indicator lamp illuminates when the button is pressed.
-
a rotary control for manually selecting output modes (5).
-
a spring loaded note paper holder (6).
The MTC A/C-heater control (1) is mechanically connected to the blend-air door and the mode door cam by use of flexible cables (2 and 3).
The MTC A/C-heater control cannot be repaired or adjusted and must be replaced if inoperative or damaged.
