Sprinter 3500 V6-3.0L DSL Turbo (2008)
10. Install the A/C liquid line (1) and the A/C suction line (2) onto the A/C expansion valve.
11. Install the nut (3) that secures the A/C liquid line and the A/C suction line to the A/C expansion valve. Tighten the nut to 6 Nm (53 in. lbs.).
12. Connect the heater hoses (4) to the heater core. Tighten the clamps securely.
13. Install the air cleaner housing See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service
and Repair.
14. Reconnect the negative battery cable.
15. If the heater core is being replaced, flush the cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
16. Refill the engine cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
17. If the A/C evaporator is being replaced, add 60 milliliters (2 fluid ounces) of refrigerant oil to the refrigerant system. When replacing multiple A/C
system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to the refrigerant system See: Service
and Repair/Refrigerant Oil Level. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
18. Evacuate the refrigerant system See: Service and Repair/Refrigerant System Evacuate.
19. Charge the refrigerant system See: Service and Repair/Refrigerant System Charge.
