Sprinter 3500 V6-3.0L DSL Turbo (2008)
Center Mounted Brake Lamp: Service and Repair
Center High Mounted Stop Lamp - Installation
INSTALLATION
1. Position the Center High Mounted Stop Lamp (CHMSL) (2) near the opening in the rear roof panel (1).
2. Reconnect the vehicle wire harness connector to the lamp connector.
3. Position the CHMSL into the rear roof panel opening.
4. Install and tighten the two screws (3) that secure the CHMSL to the roof panel. Tighten the screws securely.
5. Reconnect the battery negative cable.