Sprinter 3500 V6-3.0L DSL Turbo (2008)
Fluid - A/T: Description and Operation
Description - Automatic Transmission Fluid - NAG1
AUTOMATIC TRANSMISSION FLUID - NAG1
NOTE: Refer to Service Procedures for fluid level checking procedures.
Use ATF approved to MB 236.10, MB 236.12, such as Shell ATF 3403/M-115, MOPAR(R) part number 05127382AA, Fuchs/Shell ATF 3353, or
equivalent.
Automatic Transmission Fluid (ATF) is red in color when new. The ATF is dyed red so it can be identified from other fluids used in the vehicle such as
engine oil or antifreeze. The red color is not permanent and is not an indicator of fluid condition. As the vehicle is driven, the ATF will begin to look
darker in color and may eventually become brown. This is normal.
FLUID ADDITIVES
DaimlerChrysler strongly recommends against the addition of any fluids to the transmission, other than those automatic transmission fluids listed above.
Exceptions to this policy are the use of special dyes to aid in detecting fluid leaks.
Various "special" additives and supplements exist that claim to improve shift feel and/or quality. These additives and others also claim to improve
converter clutch operation and inhibit overheating, oxidation, varnish, and sludge. These claims have not been supported to the satisfaction of
DaimlerChrysler and these additives must not be used. The use of transmission "sealers" should also be avoided, since they may adversely affect the
integrity of transmission seals.
