Sprinter 3500 V6-3.0L DSL Turbo (2008)
Maintenance Required Lamp/Indicator: Service and Repair
STANDARD PROCEDURE - Active Service System (ASSYST) Maintenance Reset
Description
The ASSYST tells you when the fleA service is due.
The deadline for the service is indicated in either days or miles/km, depending on the number of miles/kilometers driven.
About one month before the service is due, the multi-function display indicates whether
Service A: Oil Service Plus or
Service B: a maintenance sercie will be carried out. The display appears for approximately ten seconds after you have turned the ignition on. At the same
time, the remaining distance in miles/km or the remaining time in days is also displayed.
When the remaining time in days is shown, the time symbol is displayed.
If you have exceeded the service date,
-
the service display will blink for 10 seconds in the multi-function display after the ignition has been turned on,
-
and a minus sign will appear in front of the service date.
After each service (Oil Service Plus or maintenance service), the authorized dealer or Sprinter service center will reset the service display.
High Line Vehicles
1. Switch on the ignition.
NOTE: The total miles/kilometers must be displayed in order to reach the "service scope x in xxx km" menu.
2. Press the system selection button in the lower control panel (S111s3-menu buttons(lower left)) until the total kilometers are displayed
3. Press the upper control panel on the scroll forward/back button (S111s1 - up and down arrow (upper right)) several times until "service scope x in
xxx km" appears in the multifunction display of the instrument cluster.
4. Press button 0 (1) on the instrument cluster for approx. 30 s until a beep sounds.
5. Press the lower control panel of the system selection button (S111s3) once.
6. Press the upper control panel of the scroll forward and back button (S111s1) until Service in xxx km appears in the multifunction display of the
instrument cluster.
7. Press button 0 (1) on the instrument cluster. The menu Carry out (Carry out as display in the multifunction display) appears in the multifunction
display of the instrument cluster.
