Sprinter 3500 V6-3.0L DSL Turbo (2008)
5. Position the lower steering column opening cover (2), and the side cover (4) to the instrument panel.
6. Install and tighten the screws (1 and 3) that secure the lower steering column opening cover and the side cover to the instrument panel.
7. Reconnect the battery negative cable
8. If the original EIS was communicating on the CAN Bus, use the scan tool to transfer the basic vehicle configuration to the new EIS. Otherwise,
use the scan tool to download the correct flash file for the vehicle, and program the new EIS control unit.
9. Using the scan tool, program the EIS to recognize the existing key fobs.
10. For vehicles equipped with an automatic transmission, verify that it is possible to shift the transmission gear selector lever out of the P (PARK)
position with the ignition switch in the ON position and the brake pedal depressed. It should only be possible to turn the key back to the LOCK
position and remove the key from the switch when the gear selector lever is in the P (PARK) position.
