Sprinter 3500 V6-3.0L DSL Turbo (2008)
Parking Assist Distance Sensor: Service and Repair
Park Assist Sensor - Installation
INSTALLATION
1. Align and insert the park assist sensor (2) and O-ring into the sensor receptacle on the back of the bumper (1) as a unit. Be certain that the narrow
side of the tapered O-ring is oriented towards the sensor membrane and the face of the bumper.
2. Engage the strap (3) over the upper and lower latch features of the bumper receptacle for the sensor.
3. From the back of the bumper, reconnect the wire harness connector (4) to the sensor connector receptacle.
4. Reinstall the bumper onto the vehicle. See: Body and Frame/Bumper/Front Bumper/Service and Repair/Service Manual/Installation or See: Body
and Frame/Bumper/Rear Bumper/Rear Bumper Cover / Fascia/Service and Repair/Installation.
5. Reconnect the battery negative cable.