Sprinter 3500 V6-3.0L DSL Turbo (2008)
2. Refit the strut (2) and knuckle assembly back into the upper mounting hole (1).
3. Install the lower stabilizer link nut to the spring stop plate Tighten to 58 Nm (43 ft. lbs.).
4. Install the rear half of the wheel well liner.
5. Install the tire and wheel assembly See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
6. Lower the vehicle.
7. Install the upper strut mounting bolts (3) Tighten the bolts to 28 Nm (21 ft. lbs.).
8. Install the floor pan screws (1) and floor mat (2).
