Sprinter 3500 V6-3.0L DSL Turbo (2008)
Axle Bearing: Service and Repair
Bearing/Seal-Axle Hub
Removal
REMOVAL
1. Remove brake caliper with support.
2. Remove axle shaft.
3. Back-off parking brakes.
4. Remove outer hub nut (1) with Wrench 10095.
5. Remove locking plate (2), inner hub nut (1) and thrust washer (3).
CAUTION: Thrust washer is designed for left or right side and are not interchangeable.
6. Pull hub off axle tube.
7. Remove front hub bearing (1) from hub (2).