Sprinter 3500 V6-3.0L DSL Turbo (2008)
Flex Plate: Service and Repair
Installation
INSTALLATION
NOTE: Do Not lubricate new bolts as they are already coated with an anti-scuff treatment.Align the flex plate to hub paint marks, where
applicable.
1. Install the flex plate locating pin.
2. Install the flex plate to the hub and install the fasteners. Tighten the flex plate fasteners in a cross sequence to 44 Nm (32.5 ft. lbs.).
3. Install the transmission.See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Installation
