Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Sliding Door Handle: Service and Repair
Service Manual
Removal
REMOVAL
1. Remove trim cap (5).
2. Remove bolt (4).
3. Carefully pry out the cap (2).
4. Remove seal (3).
5. Pull out exterior handle (1).
Installation
INSTALLATION
1. Install exterior handle (1) into door opening and push in until seated.
2. Install seal (3).
3. Install cap (2).
4. Install bolt (4) and tighten to 3 Nm (26.5 in. lbs.).
5. Install trim cap (5).
Removal
REMOVAL