Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
REMOVAL
Passenger Van
1. Remove seats as necessary.
2. Remove d-pillar trim if necessary.
3. Using a trim stick C-4755 or equivalent, separate the push-pin fasteners and remove trim panels.
Cargo Van
1. Remove bolts and remove tie down rings, if equipped.
2. Remove rivets and remove paneling
Quarter Trim Panel - Installation
INSTALLATION
Passenger Van
1. Position trim panels and seat push-pin fasteners fully.
2. Install d-pillar trim, if necessary.
3. Install seats, if necessary.
Cargo Van
1. Install paneling and replace rivets.
2. Install tie down rings and bolts, if equipped.