Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Brake Bleeding: Service and Repair
Pressure Bleeding
PRESSURE BLEEDING
Use approved brake fluid. Use fresh, clean fluid from a sealed container at all times.
Follow the manufacturers instructions carefully when using pressure equipment. Do not exceed the tank manufacturers pressure recommendations.
Generally, a tank pressure of 15-20 psi is sufficient for bleeding.
Fill the bleeder tank with recommended fluid and purge air from the tank lines before bleeding.
Do not pressure bleed without a proper master cylinder adapter. The wrong adapter can lead to leakage, or drawing air back into the system.