Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Brake Master Cylinder: Removal and Replacement
Removal
REMOVAL
1. Using a suction gun remove as much brake fluid from the reservoir (2) as possible.
2. Remove the cooler feed tube (3) (if equipped).
3. Disconnect the electrical connector for the brake fluid level indicator (1).
4. Remove the fluid reservoir bolt (6) to the master cylinder (9).
5. Replace the seals (1) for the reservoir on the master cylinder (3).
Installation
INSTALLATION
1. Install the fluid reservoir onto the new seals (1) on the master cylinder (3).