Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Parking Brake Cable: Service and Repair
Removal
Front Cable
FRONT CABLE
1. Raise and support the vehicle.
2. Disconnect the front park brake cable (1) from the pulley unit.
3. Unclip the guides at the frame cross member (2) for the front cable (1) at the vehicle.
4. Remove the rubber grommet (3).
5. Remove the trim (1) for the front park brake lever.
6. Remove the front park brake cable (3) from the hand brake lever (2).
7. Remove the front park brake cable from the vehicle.
Rear Cable - Single Rear Wheel (SRW)
REAR CABLE - SINGLE REAR WHEEL (SRW)
1. Raise and support the vehicle.
2. Remove the rear tires.
3. Remove the disc brake caliper adapter.
4. Remove the rotor set screw (1).