Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Camshaft: Service and Repair
Camshaft - Removal
Camshaft - Left
LEFT
1. Disconnect negative battery cable.
2. Remove engine cover.
3. Rotate the engine to TDC using the vibration damper bolt.
4. Remove the main engine wiring harness retainers at the rear of the cylinder head cover.
5. Remove the EGR valve.
6. Remove the charge air inlet tube.
7. Disconnect the fuel line hoses at the fuel rail, high pressure pump using 9539 Pliers.
8. Disconnect the fuel lines at the left cylinder head.
