Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Lifter / Lash Adjuster: Removal and Replacement
Hydraulic Lifters - Removal
REMOVAL
1. Remove the appropriate camshafts.
2. Remove the rocker arm (1) and lifter (2) assembly.
NOTE: When the hydraulic lifters are removed from the engine, they must be stored upright and in clean conditions.
3. Separate the lifter from the rocker arm.
Hydraulic Lifters - Installation
INSTALLATION
CAUTION: When the hydraulic lash adjusters are removed from the engine, they must be stored upright and in clean conditions. Install
the finger followers and hydraulic lifters in the same location as removed.
CAUTION: Replacement of the camshaft will also require replacement of the finger followers and hydraulic lifters.
1. Assemble the hydraulic lifter (2) to the rocker arm (1) with the retaining clip (3).
2. Install the rocker arm and lifter assembly onto the cylinder head.
3. Install the camshaft(s).