Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
5. Install the balance shaft bolt (4). Torque bolt to 35 Nm ( 309 in. lbs ).
6. Install the bolt in the rear of the balance shaft 20 Nm (177 in. lbs ) and then rotate an additional 90°.
7. Install the rear balance shaft cover. Torque bolts to 8 Nm (71.8 in. lbs ).
8. Install the timing chain cover.
9. Install the torque converter and transmission.
10. Connect the battery.