Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Vibration Damper - Installation
INSTALLATION
NOTE: To prevent potential oil leaks, DO NOT touch the front crankshaft inner seal.
1. Align the alignment key in the crankshaft with the key way in the damper and install the vibration damper. Tighten the bolt to 304 Nm, plus 90
degrees (224 ft. lbs. plus 90 degrees).
2. Position the drive belt back onto the pulleys and release the belt tensioner (1).
3. Remove special tool #9102 flywheel locking tool (1).
