Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
13. Position the engine wiring harness and connect the CMP, fuel rail pressure sensor and fuel injectors.
14. Connect the fuel return hoses to fuel injectors, pushing down on the hose retainers.
15. Install the air cleaner cover and inlet tube.
16. Install the rear engine cover bracket.
17. Connect the CCV hose to air inlet tube and connect the CCV heater wiring harness connector.
18. Install the engine cover.
19. Install the strut tower support.
20. Install the coolant reservoir.
21. Connect the negative battery cable.
22. Start engine, allow to warm, turn engine off and inspect for leaks.
