Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Caution: When installing the accessory drive belt, the bolt must be the correct length and routed correctly. If not engine may overheat due to water
pump rotating in wrong direction.
1. Position drive belt (1) over all pulleys except water pump pulley.
2. Using a suitable tool, rotate accessory drive belt tensioner (2) counterclockwise. Place belt over all pulleys. Let tensioner (2) rotate back into
place. Be sure bolt is properly seated on all pulleys.
3. Install fan drive pulley.