Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
4. Install the flex plate.
5. Install the transmission.
6. Lower the vehicle and install the oil level indicator tube.
7. Fill the oil pan to the appropriate level with the correct viscosity engine oil.
8. Connect the negative battery cable.
9. Start the engine, allow to warm.
WARNING: Any time the oil is drained and filled it is very important to wait 15 minutes before starting the engine.
WARNING: Before checking the engine oil level turn the engine off and wait 15 minutes for the oil to return to the oil pan.
10. Turn engine off and inspect for leaks.
11. Install the skid plate.
