Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
7. Be sure that all of the timing marks are correctly aligned.
8. Rotate the engine and install the lower bolt into the camshaft drive gear. Tighten to 18 Nm (159 lbs.in.).
9. Install the timing chain tensioner and torque to 80 Nm (59 lbs. ft.)
10. Install the timing cover.
11. Install oil pan bolts. Tighten M6 bolts to 9 Nm (80 lbs. in.) and M8 bolts to 20 Nm (15 lbs. ft.).
12. Reconnect negative battery cable.
WARNING: USE EXTREME CAUTION WHEN THE ENGINE IS OPERATING. DO NOT STAND IN A DIRECT LINE WITH THE
FAN. DO NOT PUT YOUR HANDS NEAR THE PULLEYS, BELTS OR FAN. DO NOT WEAR LOOSE CLOTHES.
13. Start the engine, allow to warm, turn engine off and inspect for leaks. Care must be take to observe the fuel system warnings.
Timing Chain Tensioning Rail
TIMING CHAIN TENSIONING RAIL
