Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
21. Remove both accessory drive belt idler pulleys.
22. Remove the accessory drive belt tensioner.
23. Rotate the engine to TDC by the crankshaft bolt.
24. Raise and support the vehicle.
25. Remove the starter blank.
26. Install special tool 9102 crankshaft lock.
27. Lower the vehicle.
28. Remove the vibration damper and pulley.
29. Remove the front timing cover seal.
30. Remove the front timing cover bolts and cover.
Installation
INSTALLATION
NOTE: Component mating surfaces must be clean and free of all oil residue.
