Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
10. Install the EGR air control valve assembly.
11. Install the glow plug module.
12. Install the charge air outlet tube.
13. Install the cooling fan module. Tighten upper bolts to 14 Nm (10 ft. lbs.).
14. Raise and support the vehicle.
15. Remove special tool 9102 crankshaft lock.
16. Install the starter blank.
17. Install the lower cooling fan module bolts. Tighten lower bolts to 14 Nm (10 ft. lbs.).
18. Install the power steering line between the retainer and cooling fan module.
19. Connect the cooling fan wiring harness connector.
20. Install the power steering hose between the cooling fan and suspension.
21. Install the power steering hose between the pump and cooling fan.
22. Install the front skid plate.
23. Lower the vehicle.
24. Install the hoses at the power steering reservoir.
25. Fill the power steering reservoir.
